Need help?Do you have a question about the VOLTCRAFT SEM4500 and is the answer not in the manual?
General| Model | SEM4500 |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Overload Indicator | Yes |
| Measurement Range (AC Current) | 0 - 10 A |
| Measurement Range (Power) | 1 W - 3000 W |
| Measurement Range (Energy consumption) | 0 - 9999 kWh |
| Measurement Range (Sound Level) | 30 - 130 dB |
| Frequency Weighting | A, C |
| Time Weighting | Fast, Slow |
| Battery | 9V battery |
| Operating Voltage | 9 V |
| Operating Voltage Range | 200 V AC - 276 V AC |
| Functions | Data Hold |
Covers general safety guidelines, product modification, and maintenance.
Specifies suitable environments and conditions for product use.
Provides instructions on safe handling, connection, and operation.
Details the physical components and their labels on the energy cost meter.
Explains the various icons and indicators shown on the device's screen.
Instructions on how to toggle between the two main operating modes.
How to cycle through different data indicators on the display.
Procedures for entering, navigating, and exiting the device's setup menu.
Step-by-step guide on how to configure the device's time settings.
Instructions for inputting electricity tariff rates for cost calculation.
How to configure power consumption thresholds for standby modes.
Guide on entering CO2 emission factors for cost and savings calculations.
Configuration of overload alarms based on power or current limits.
Procedures for clearing stored data and settings.
Information about the display's automatic backlight function.
How to perform a full factory reset of the device.
How to define the duration for automatic measurement cycles.
Steps to start and restart automatic measurement processes.
Procedures to stop measurements and review saved data.
To Next Page