24
4. INTENDED USE
The Bluetooth
®
adapter is used to display measurements taken by
the digital multimeter on a mobile device with Apple iOS or Android
operating system. A Bluetooth
®
connection and mobile app are
required to transmit and display/evaluate data.
The adapter is easy to attach to tting multimeters. Data is
transmitted from the multimeter to the adapter via a serial infrared
interface.
The following multimeter models are designed for attachment to
the adapter: Voltcraft
®
VC830 / VC850 / VC870 / VC880 / VC890
For safety and approval purposes (CE), you must not rebuild and/
or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short-circuiting,
re, electric shock etc. Read the instructions carefully and keep
them. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European
requirements.
To Next Page
Loading...
