33
7. The model number of the digital multimeter is displayed in the
app. Conrm the device to conclude pairing.
8. Data can be transmitted when pairing has been successfully
concluded.
» The LED indicator lamp LINK ashes quickly.
d) Auto off
The adapter turns off automatically in the following circumstances:
• Low battery.
• No connection is established within 5 minutes of the adapter
being turned on.
• No data is transmitted within 5 minutes of successful pairing.
• Data transmission between adapter and mobile device is
interrupted for longer than 5 minutes.
To use the adapter again, slide the ON/OFF switch to OFF
and back to ON.
e) Ending data transmission
End data transmission by sliding the ON/OFF switch to OFF. The
adapter is now off.
To Next Page
Loading...
