www.Volumatic.com 25-201679 CE Advanced Configuration Manual Issue 4.0 Feb 2011
Page 5 of 6
Now recalibrate the FlexiCup or alternative weighing vessel and all other packs used and then test the machine again.
If CountEasy is still inaccurate then contact the CountEasy Helpdesk, the number for which can be found on the label
on the bottom of the machine.
IF YOU HAVE A TWO (2) FULL BAGS OF 20p’s (Qty: 100) ……………….
Please note it must be two (2) full bags of 20 pence pieces, a quantity of 100 and not any other denomination.
Follow the screen prompts as detailed below:
Screen Prompt:
EMPTY HOD?
OK?
Place the empty FlexiCup or alternate weighing vessel onto the machine’s hod and then press the button to
OK.
Screen Prompt:
500 g
OK?
Empty the two (2) full bags of 20p’s into the FlexiCup (they must be loose not still in their bags) and then press the
button to OK.
Screen Prompt:
500 g
OK?
Remove the FlexiCup or alternate weighing vessel containing the 20p’s from the machine’s hod and then press the
button to OK.
The screen will
momentarily read:
DONE
and will then read:
500 g
OK?
Press the button to skip this prompt.
Now recalibrate the FlexiCup or alternative weighing vessel and all other packs used – refer to the CountEasy
Configuration Manual supplied with the machine and then test the machine again.
If CountEasy is still inaccurate then contact the Helpdesk, the number for which can be found on the label on the
underneath of the machine.
RESET OPTIONS?
It is not recommended that the user use this option. This menu option allows you to reset all of the OPTIONS?
and the CUP calibration to their original factory default settings as shown below.
Please be aware that when you choose to RESET OPTIONS this does not affect the currency settings.
COUNTEASY
FACTORY DEFAULT SETTINGS
SETTINGS
LANGUAGE? GBR
COIN PACKS? BAG
AUTO ADD? OFF
AUTO SCROLL? OFF
CUP? OFF
SOUND? ON ERROR
AUTO PACK CHECK? ON
SMARTWEDGE? YES
PRINTING ORDER? DESCENDING
AUTO CHECK FIRST? OFF
*CALIBRATE CUP? 58.50g
To Next Page
Loading...