Display Contrast
The display contrast can be adjusted in increments of
10% between 0–100%.
This setting only applies to the display in the EVC Info
Display. Each display in the boat is set separately.
In the Settings menu, scroll to select Display Contrast.
Press the OK button to enter the display contrast set-
tings. Adjust the level of contrast by using the scroll
buttons and press OK to set the level.
EVC Info
The EVC Info function is designed to provide informa-
tion specific to the EVC system installation on your
boat. This information will help your boat dealer iden-
tify the features of your EVC system and will facilitate
any troubleshooting that may be necessary.
The submenus located in the EVC Info function are
informational only and cannot be modified.
Units
The Units option allows you to select which units to
display. These settings need to be performed only
on one display (twin installation) at one station for
the settings to apply to all displays in the boat.
In the Settings menu, scroll to select Units. Press the
OK button to enter Units settings.
US or Metric
Press the OK button to enter the US or Metric menu
selection. Highlight the units of your choice and con-
firm by pushing the OK button. Your choice should
have a blackened box next to it for it to be activated.
Distance
Press the OK button to enter the Distance menu selec-
tion. Highlight the distance units of your choice and
confirm by pushing the OK button. Your choice should
have a blackened box next to it for it to be activated.
Instruments and Controls
40 47701898 12-2010
To Next Page
Loading...
