Language
The displays can show information in 10 different lan-
guages. This setting needs to be performed only
on one display (twin installation) at one station for
the settings to apply to all displays in the boat.
In the Settings menu, scroll to select Language. Press
the OK button to enter Language settings.
Scroll to highlight the language of your choice. Press
the OK button to activate the highlighted language.
Your choice should have a blackened box next to it for
it to be activated. All EVC menus will now appear in
the language selected.
Info Beep
The info beep sound level for the built-in buzzer in the
EVC system can be adjusted in increments of 5%
between 0–100%. This setting needs to be per-
formed on each station. For twin installations: The
setting only needs to be performed on either dis-
play on each station.
In the Settings menu, scroll to select Info Beep Level.
Press the OK button to enter Info Beep settings. Adjust
the level of sound by using the scroll buttons, then
press the OK button set the level.
Instruments and Controls
47701898 12-2010 41
To Next Page
Loading...
