EasyManua.ls Logo

Volvo Penta KAD32 User Manual

Volvo Penta KAD32
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION BOOK
AD31, TMD31, TAMD31
KAD32, AD41, TMD41, TAMD41
TAMD42/WJ, KAD43, KAMD43
Question and Answer IconNeed help?

Do you have a question about the Volvo Penta KAD32 and is the answer not in the manual?

Volvo Penta KAD32 Specifications

General IconGeneral
Fuel SystemDirect injection
Cooling SystemFreshwater cooled with heat exchanger
Engine TypeDiesel
Power Output170 hp
AspirationTurbocharged
Bore92 mm
Stroke90 mm
Rated RPM3800 rpm

Summary

Safety Precautions

Operating Safety

General safety advice and precautions for operating the boat.

Maintenance & Service Safety

Safety guidelines for performing maintenance and service operations on the engine.

Introduction and Identification

Manual Overview

Introduction, environmental responsibility, and general engine specifications.

Identification Numbers

Location and importance of engine and drive identification plates for service.

Instrument and Control Systems

Instrument Panels and Displays

Descriptions of main, extra, and control panels, gauges, indicators, and warning displays.

Control Systems

Operation of control levers, power trim, and engine starting procedures.

Engine Operation

General Operation

Guidance on checking instruments, alarms, maneuvering, and cruising.

Special Operating Conditions

Procedures for trim adjustment, running aground, sailing, and other specific situations.

Engine Stopping and Storage

Steps for stopping the engine and preparing for storage or transport.

Maintenance Procedures

Engine Maintenance

Routine checks and replacements for air cleaner, filters, oil, coolant, and belts.

Drive, Gear, and Steering Maintenance

Maintenance for reverse gear, drive, steering systems, and propeller shaft seals.

Fuel, Seawater, and Electrical Systems

Maintenance of fuel, seawater, electrical systems, and batteries.

Laying Up and Launching

Inhibiting and Storage

Procedures for protecting the engine and boat during storage and winterization.

Preparing for Use

Steps for bringing the boat out of storage and preparing for launch.

Painting and Cleaning

Guidelines for painting the drive, hull, and general cleaning.

Troubleshooting and Data

Fault-tracing Guide

Common problems and their probable causes for troubleshooting engine issues.

Technical Data

Specifications and data for engine models, systems, and fluids.

Related product manuals