EasyManua.ls Logo

Volvo Penta KAD43 User Manual

Volvo Penta KAD43
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION BOOK
AD31, TMD31, TAMD31
KAD32, AD41, TMD41, TAMD41
TAMD42/WJ, KAD43, KAMD43
Question and Answer IconNeed help?

Do you have a question about the Volvo Penta KAD43 and is the answer not in the manual?

Volvo Penta KAD43 Specifications

General IconGeneral
Engine TypeDiesel
TurbochargerYes
SuperchargerYes
Fuel SystemDirect Injection
Max RPM3800 rpm
Compression Ratio17.5:1
ConfigurationInline 6
Power Output230 hp
Bore92 mm
Stroke90 mm
Displacement3.6 liters
Weight (Dry)595 kg (1312 lbs)

Summary

Safety Precautions

Safety Precautions for Operating the Boat

General safety measures for operating the boat.

Carbon Monoxide Poisoning

Risks and precautions related to carbon monoxide poisoning in boats.

Safety Precautions for Maintenance and Service

Safety guidelines for performing maintenance and service on the engine.

Power Trim System

Starting the Engine

Pre-Start Checks

Essential checks before starting the engine.

Engine Starting Procedure

Step-by-step guide to starting the engine.

Operation

Instrument Checks and Alarms

Monitoring instruments and responding to alarms during operation.

Stopping the Engine

Engine Stopping Procedure

Steps for safely stopping the engine.

Maintenance Schedule

Service Intervals and Tasks

Scheduled maintenance tasks based on operating hours and time intervals.

Maintenance

Engine General Maintenance

Procedures for air cleaner, crankcase ventilation filter, and compressor.

Oil Change Procedures

Steps for changing engine oil and filters.

System Checks and Adjustments

Checking exhaust system and adjusting drive belts.

Drive Belt Maintenance

Procedures for servicing generator, compressor, and servo pump belts.

Lubrication System

Oil Level and Filter Service

Checking oil level, topping up, and changing oil filters.

Cooling System

Coolant Management

General information, filling, and changing engine coolant.

Seawater System

Fuel System

Fuel System Venting and Emergency Stop

Procedures for venting the fuel system and using the emergency stop.

Electrical System

Reverse Gear

Reverse Gear Servicing

Checking oil level, changing oil, and servicing the propeller shaft seal.

Drive System

Corrosion Protection

Checking and replacing sacrificial anodes for corrosion prevention.

Steering System

Propellers

Fault-Tracing

Related product manuals