Need help?Do you have a question about the Volvo Penta KAD/KAMD300 and is the answer not in the manual?
General| Brand | Volvo Penta |
|---|---|
| Model | KAD/KAMD300 |
| Category | Engine |
| Language | English |
Basic safety precautions for operating a boat, including checks and rules.
Safety measures for performing maintenance and service on the engine.
Pre-start checks and procedures for engine and boat.
How the EDC system manages starting and initial engine warm-up.
Step-by-step procedure for starting the engine using the ignition switch.
Procedure for starting the engine using the start button.
Checking instruments after starting and warming up the engine.
Checking oil pressure, engine coolant temperature, and charging status.
Daily checks before starting the engine, including general inspection and fluid levels.
General inspection of the engine and engine room for leaks, wear, and damage.
Procedures for checking and changing engine oil and filters.
Checking oil level and changing oil/filter for the reverse gear.
Checking corrosion protection, changing drive oil, and replacing bellows.
Table of common engine symptoms and their potential causes.
Safety precautions and procedure for starting the engine with auxiliary batteries.
Manual engagement of drive/reversing gear when electronic shifting fails.
Procedure for calibrating the EDC system after control replacement.
Calibrating the electronic single lever control for EDC system.
Calibrating mechanical single lever controls for EDC system.
Calibrating dual lever controls for EDC system.
Overview of the EDC diagnostic function and its tasks.
How to read diagnostic trouble codes (DTCs) from the system.
Procedure for erasing diagnostic trouble codes from the system memory.
List of diagnostic trouble codes, their causes, consequences, and corrective actions.
To Next Page