Need help?Do you have a question about the Volvo Penta MD2010 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Number of Cylinders | 2 |
| Power Output | 10 hp |
| Fuel System | Direct injection |
| Lubrication System | Pressure lubrication |
| Displacement | 0.5 liters |
| Alternator | 12V |
| Max Power Output | 10 hp |
| Cooling System | Freshwater cooled |
Details safety measures and advice for operating the boat and engine correctly and safely.
Outlines essential safety guidelines and warnings for performing maintenance and service operations.
Provides instructions and recommendations for the initial 10 operating hours of a new engine.
Explains how to use the combined shift and throttle lever for maneuvering the boat.
Lists essential checks and preparations to perform before starting the engine.
Step-by-step guide for starting the engine using an instrument panel with an ignition switch.
Procedure for starting the engine with an instrument panel that lacks an ignition switch.
Instructions on how to safely start the engine using auxiliary batteries for jump-starting.
Details procedures for checking oil levels and changing engine oil and filters.
Covers coolant general information, water quality, freezing protection, and coolant level checks.
Includes procedures for venting the fuel system and changing the fuel filter.
Covers checks for the main switch, electrical connections, and fuses.
Details battery maintenance, connecting/disconnecting, and charging procedures.
Provides key general data for MD2010-D, MD2020-D, MD2030-D, and MD2040-D engines.
Details oil capacity, quality, viscosity, and tightening torque for the lubrication system.
Lists data for cooling system components like thermostats and freshwater system capacity.
Provides data on system voltage, battery capacity, and AC generator output.
To Next Page
