EasyManua.ls Logo

Volvo Penta MD2020 User Manual

Volvo Penta MD2020
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
MD2010, MD2020, MD2030, MD2040

Other manuals for Volvo Penta MD2020

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta MD2020 and is the answer not in the manual?

Volvo Penta MD2020 Specifications

General IconGeneral
Engine TypeDiesel
Number of Cylinders3
Rated Speed3600 rpm
Cooling SystemFreshwater cooled
Fuel SystemIndirect injection
Power Output13.8 kW (18 hp)
Max Output20 hp

Summary

Safety Precautions

Safety When Operating the Boat

General advice and warnings for safe boat operation.

Safety During Maintenance and Service

Precautions for performing engine maintenance and service safely.

Controls

Maneuvering with Control Lever

How to shift gears and control engine speed using the lever.

Starting the Engine

Pre-Start Checks

Essential checks before attempting to start the engine.

Starting with Ignition Switch Panel

Procedure for starting with an ignition switch instrument panel.

Starting with Panel Without Ignition Switch

Procedure for starting with a panel lacking an ignition switch.

Starting Using Auxiliary Batteries

Steps for starting the engine using auxiliary batteries.

Operation

Maneuvering Techniques

Proper shifting procedures for ahead and astern movement.

Maintenance Schedule

Every 100 Hours / Annual Maintenance

Tasks like oil and filter replacement every 100 hours or annually.

Every 200 Hours / Annual Maintenance

Tasks like fuel filter, coolant, and impeller checks.

Lubrication System

Engine Oil Checks and Changes

Procedure for checking and adding engine oil.

Cooling System

Coolant Management

Coolant general information, water quality, and antifreeze protection.

Seawater System Maintenance

Impeller, filter, vacuum valve, flush and drain procedures.

Electrical System

Battery Maintenance and Charging

Safety and procedures for battery maintenance and charging.

S Drive and Reverse Gear

Oil Level Checks and Changes

Procedure for checking and changing oil in S drives and reverse gears.

Laying Up and Launching

Inhibiting Procedures

Engine and system preparation steps for storage.

Fault-Tracing

Common Symptoms and Causes

Table of engine symptoms and their potential causes for troubleshooting.

Related product manuals