Need help?Do you have a question about the Volvo Penta TAD1343GE and is the answer not in the manual?
General| Engine Model | TAD1343GE |
|---|---|
| Manufacturer | Volvo Penta |
| Category | Diesel Engine |
| Number of Cylinders | 6 |
| Cylinder Arrangement | In-line |
| Displacement | 12.8 L |
| Fuel System | Common Rail |
| Aspiration | Turbocharged |
| Cooling System | Water-cooled |
| Engine Type | 4-stroke diesel engine, Direct injection |
| Emissions Compliance | EU Stage V |
Information on necessary protective gear for safe operation and maintenance.
Warnings about the hazards of moving engine components and hot surfaces.
Critical checks and precautions before starting the engine to prevent hazards.
Cautionary advice on opening hot coolant systems to avoid burns from steam or fluid.
Essential checks before starting the engine, including oil and fuel levels.
Step-by-step guide for starting the engine, with or without pre-heating.
Risks and consequences of prolonged low load operation, including oil dilution and deposits.
Steps to properly stop the engine using the STOP button and main switch.
Purpose of the diagnostic function to monitor, control, and protect the engine.
Table of symptoms and possible causes of engine malfunctions.
Table listing fault codes (SPN, PID, FMI) and their corresponding components.
To Next Page