EasyManua.ls Logo

Volvo Penta TAD1353VE User Manual

Volvo Penta TAD1353VE
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s manual
16L
TP-6662 1/19d

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD1353VE and is the answer not in the manual?

Volvo Penta TAD1353VE Specifications

General IconGeneral
Engine ModelTAD1353VE
Number of Cylinders6
Fuel SystemCommon Rail
Cooling SystemLiquid-cooled
Compression Ratio17.5:1
AspirationTurbocharged
Engine TypeIn-line 6-cylinder diesel engine

Summary

Safety Information

Safety Text Priority and Symbols

Explains safety text hierarchy (Danger, Warning, etc.) and symbols used.

Eye, Skin, and Fire Safety

Emphasizes eye/skin protection and fire/explosion prevention measures.

Spare Parts, Materials, and Ventilation Safety

Safe use of parts, materials, and engine ventilation procedures.

Rotating Parts, Hot Surfaces, and Start Spray

Hazards of rotating parts, hot surfaces, and prohibition of start spray use.

Pre-Start, Electrical, Welding, and Cooling Safety

Safety procedures for starting, electrical work, welding, and cooling systems.

Coolant, Oil, Refueling, and Fuel Quality Safety

Warnings about hot fluids, refueling risks, and proper fuel quality.

Fuel System Leaks, Battery Handling, and Electrolyte Safety

Risks of fuel leaks, safe battery handling, and electrolyte hazards.

Safe Engine Cleaning and Clutch Adjustment

Advises against high-pressure washing and states clutch adjustments require a stopped engine.

Introduction

Certified Engines and Emissions Compliance

Special demands on care and maintenance for emission-certified engines.

Instruments and Controls

Engine Starting Procedures

Before Starting Checks and Warnings

Pre-start checks including oil level, fuel valves, and coolant.

Engine Starting with DCU Panel

Procedures for starting the engine with or without pre-heating using the DCU panel.

Engine Operation

Engine Shutdown Procedures

Pre-Shutdown Procedures and Stopping the Engine

Pre-shutdown procedures and steps to stop the engine using the STOP button.

Fault Handling and Diagnostics

Diagnostic Function Purpose

Purpose of the diagnostic function to monitor, control, and protect the engine.

Fault Tracing Symptoms and Causes

Table of symptoms and possible causes of engine malfunctions.

Fault Code Register

Engine Fault Code Listings (SPN and FMI)

Table listing engine fault codes (SPN) and their FMI values.

Comprehensive Fault Code Reference

Detailed table of fault codes, components, and FMI values.

Maintenance Schedule

Service Interval Overview and Extensions

Overview of standard and extended service intervals.

Maintenance Procedures

Drive Belt Replacement Procedure

Step-by-step procedure for changing the drive belt.

Alternator Belt Replacement Procedure

Step-by-step procedure for replacing the alternator belt.

Engine Oil Level Check and Topping Up

Procedures for checking and topping up engine oil levels.

Engine Oil Change Procedure

Step-by-step guide for changing engine oil.

Oil Filter and By-pass Filter Change

Procedure for changing the oil filter and by-pass filter.

Engine Fuel Filter Replacement

Step-by-step guide for replacing the engine fuel filter.

Fuel Pre-filter Change Procedure

Procedure for changing the fuel pre-filter and water trap.

Fuel System Bleeding Procedure

How to bleed the fuel system to remove air.

Coolant Level Check and Topping Up

Procedures for checking and topping up the coolant level.

Battery Replacement Procedure

Step-by-step guide for replacing the battery.

Engine Storage Procedures

Related product manuals