Need help?Do you have a question about the Volvo Penta TAD722GE and is the answer not in the manual?
General| Engine Model | TAD722GE |
|---|---|
| Fuel System | Common Rail |
| Displacement | 7.2 L |
| Aspiration | Turbocharged |
| Weight | 850 kg (1874 lbs) |
| Engine Type | Inline 6-cylinder, 4-stroke |
| Cooling System | Liquid-cooled |
Essential safety guidelines for operating and servicing engines.
Explains manual structure, power standards, and engine identification.
Details working methods, special tools, and cleanliness standards for repairs.
Details the location and information found on engine identification plates.
Lists type designation, bore, stroke, displacement, and cylinder count.
Provides specs for engine block, cylinder head, bolts, and cylinder liners.
Lists specs for pistons, rings, valves, seat angles, and valve clearance.
Details crankshaft journals, connecting rods, and main/rod bearing specs.
Outlines oil grades, oil change intervals, viscosity, and cooling system parameters.
Covers fuel system components, specs, feed pump, and injection pump details.
Details governor specs, control rod dimensions, turbocharger, and air intake.
Lists specific tightening torques for engine components and systems.
Lists type designation, bore, stroke, displacement, and cylinder count.
Provides specs for cylinder liners, engine block, and head bolts.
Lists specs for pistons, rings, valves, seat angles, and valve clearance.
Details crankshaft journals, connecting rods, and main/rod bearing specs.
Outlines oil grades, oil change intervals, viscosity, and cooling system parameters.
Covers fuel system components, specs, feed pump, and injection pump details.
Details governor specs, control rod dimensions, turbocharger, and air intake.
Details cooling system type, capacity, thermostat, and coolant pump specifications.
Lists specific tightening torques for engine components and systems.
Lists type designation, bore, stroke, displacement, and cylinder count.
Provides specs for cylinder liners, engine block, and head bolts.
Lists specs for pistons, rings, valves, seat angles, and valve clearance.
Details crankshaft journals, connecting rods, and main/rod bearing specs.
Outlines oil grades, oil change intervals, viscosity, and cooling system parameters.
Covers fuel system components, specs, feed pump, and injection pump details.
Details governor specs, control rod dimensions, turbocharger, and air intake.
Details cooling system type, capacity, thermostat, and coolant pump specifications.
Lists specific tightening torques for engine components and systems.
Illustrates tightening procedures for main bearing caps and connecting rod big-end bearings.
Details tightening sequences for flywheel and V-belt pulley/vibration damper.
Shows cylinder head bolt tightening and injection pump flange screw procedures.
Provides tightening specifications for delivery pipes and various screw plugs.
To Next Page