Need help?Do you have a question about the Volvo Penta TAD721GE and is the answer not in the manual?
General| Engine Model | TAD721GE |
|---|---|
| Number of Cylinders | 6 |
| Displacement | 7.2 L |
| Torque | 1050 Nm |
| Fuel System | Common Rail |
| Aspiration | Turbocharged |
| Rated Speed (rpm) | 2200 rpm |
| Cooling System | Liquid-cooled |
| Bore (mm) | 108 mm |
| Emission Level | EU Stage II |
| Engine Type | In-line 6-cylinder diesel engine |
| Stroke (mm) | 130 mm (5.12 in.) |
Provides an overview of technical data for various engine models.
Essential safety measures to observe when operating or servicing the engine.
Explains the manual's purpose, scope, and how to use it effectively.
Covers general torque values, angle tightening, and lock nut usage.
Lists and explains the information found on engine identification plates.
Presents key general specifications for TD/TAD420-660VE engines.
Details piston specifications and piston ring clearances/gaps.
Lists valve dimensions, seat angles, and clearance specifications.
Details dimensions for crankshaft journals and main bearing shells.
Recommends oil grades based on fuel sulfur content and specifies oil change intervals.
Details fuel tank, fuel lines, and filters for 420/620 series engines.
Explains basic measurements and tolerances for Bosch injection pumps.
Details governor specifications and control rod dimensions.
Lists turbocharger details, air intake restrictions, and exhaust gas temperatures.
Lists torques for engine mounting, bearings, flywheel, and housings.
Presents key general specifications for TD/TAD520 and TAD530/531/532GE engines.
Details fuel tank, lines, and filters for 520/530 series engines.
Presents key general specifications for 720-760 series engines.
Details fuel tank, lines, and filters for 720-733 series engines.
Explains basic measurements and tolerances for injection pumps.
Details governor specifications and control rod dimensions.
Illustrates tightening sequences for main bearings and connecting rods.
A form for users to provide feedback or comments on the manual.
To Next Page