pg. 66 Replacing bulbs
Replacing tail lamp bulbs
All tail lamp bulbs are replaced from inside of trunk.
1. Unscrew and remove tail lamp inside cover. Note that inside cover is hooked at the lower edge.
2. Turn bulb holder approx. 3/8" (1 cm) counterclockwise and remove it.
3. Depress bulb in bulb holder, turn it slightly counterclockwise, and remove it.
4. Install a new bulb. Install bulb holder in tail lamp. NOTE: One of the bulb holder tabs is wider and
fits in corresponding recess only.
5. Turn bulb holder clockwise. Check that bulb lights. Replace tail lamp inside cover.
Bulbs
Power
CP(W)
Socket
US Bulb
No
1 Reflector -
file:///K|/ownersdocs/1985/1985_740_GL_GLE_Turbo/85740_05.htm (6 of 16)12/30/2006 7:46:09 AM
To Next Page
Loading...
Need help?
General
