Use position 1 to select low gear when no upshift is desired, for instance, when entering and descending
steep grades.
Shift gate
The gear selector can be moved freely between D and 2. Selections of other positions are obtained by
depressing the selector knob prior to moving the selector.
Slightly depressing the selector knob allows selection of positions N, D, 2 and 1.
Fully depressing the selector knob allows selection of positions R and P. This is also necessary when
initially bringing the selector out of position P.
Fully depressing the selector knob thus permits shifting freely between all positions.
pg. 47 Automatic transmission (cont.)
To Next Page
Loading...
