Replacing tail lights bulbs
All tail lamp bulbs are replaced from inside of trunk.
1 Unscrew and remove tail lamp inside cover. Note that inside cover is hooked at the lower edge.
2 Turn bulb holder approx. 3/8" (1cm) counterclockwise and remove it.
3 Depress bulb in bulb holder, turn it slightly counterclockwise, and remove it.
4 Install a new bulb. Install bulb holder in tail lamp.
5 Turn the bulb holder clockwise. Check that bulb lights. Replace tail light inside cover.
Bulbs Power Socket
US Bulb
No
CP
(W)
1 Back up light
32
(21)
BA
15s
1156
2 Rear foglamp
32
(21)
BA
15s
1156
To Next Page
Loading...
