It is necessary to remove the fuses to see if they are blown, see next page for information on fuses and
related circuits.
If you find it difficult to obtain access to the fuses, unclip the fuse tool on the right-hand side of the fuse
compartment and use it to remove the fuse, see illustration.
1 Press the tool onto the fuse.
2 Pull the tool and fuse straight up
3 Pull out the fuse from the tool and push in a new fuse in the same way.
4 Push in the fuse in the fusebox with the tool.
5 Slide the tool out.
To Next Page
Loading...
