CARGO COVER*
HARD CARGO COVER*
Installation
Pull all four lock buttons backwards to their
end positions. Carefully lift in the cargo cover,
position the front section on the two supports
behind (A) on both sides.
HOLDER FOR FLOOR HATCH
Fasten the hooks at the floor (A).
Press together the spring-loaded rail and affix
the brackets at (B) on both sides.
Affix the brackets at (C) in the same way.
Fasten the hooks at (D).
Undo the attachment points (D), and (C) if
necessary, on both sides during loading.
Undo (D), (C), (B) and (A) and roll up the cargo
cover when not in use.
Floor hatch in open position without/with cargo
cover.
Align one rear lock at (B) and press the lock
button forwards. Lock the three remaining ones
in the same way.
Removal
First pull the lock buttons at (A), then at (B),
backwards to their end positions. Take out the
cargo cover.
LOWERING THE BACKREST
To Next Page
