Volvo Trucks North America, Inc. Date Group No. Page
Service Bulletin 4.2004 392 08 24(47)
Bad Tape Detect
If the receiver detects a bad cassette, “BAD TAPE” will
appear on the display, and the tape will be ejected. The
tape may be damaged or too tight. If it is damaged, try a
new tape. If the tape is too tight, the player cannot turn
the tape hubs. Remove the tape and hold it with the open
end down. Turn the right hub counterclockwise with a
pencil. Turn the tape over and repeat. If the hubs do not
turn easily, your tape may be damaged and should not
be used in the player.
In order to use a CD adapter or a cleaning cassette, the
bad tape detector must be turned off.