Volvo Trucks North America, Inc. Date Group No. Page
Service Bulletin 4.2004 392 08 34(47)
Inserting and Removing CD Magazines — XTA Family
Note: The CD Changer Magazine can be loaded into the
changer with the vehicle’s ignition on or off.
After the magazine is loaded, it initializes and checks to
see which magazine trays have been loaded. Depending
on the number of discs in the magazine, initialization can
last a little over a minute. After the changer completes
initialization, the disc in the lowest numbered tray is
loaded, and the changer is ready to play.
W3006163
To Insert the CD Magazine into the Changer:
1 Carefully load the magazine according to the “Loading
and Unloading the CD Magazine” section of this
manual. Ensure that all your CDs are loaded with the
label facing the arrow side of the magazine and that
they are completely in the disc tray.
2 Using the CD Changer door handle, slide the changer’s
door all the way to the right. There should be an
audible ’click’ when the door is completely open.
3 With the arrow side of the magazine facing up, gently
push the magazine into the changer in the direction
of the arrow until it stops.
4 Close the CD Changer door. There should be an
audible ’snap’ when the door is completely closed.
W3006168
To Next Page
Loading...