Volvo Trucks North America, Inc. Date Group No. Page
Service Bulletin 4.2004 392 08 37(47)
XTA Family
1 Make sure the CD Changer is loaded.
2 Turn on the receiver.
3 Press the
CD Changer
button (1) on the receiver.
When a CD begins to play, the display will show the
disc number, track number and the elapsed time on the
track. Then the display returns to the default display
you have chosen. If there is not a CD loaded in the
changer and you press the changer button, the display
will read “NO DISC” for 5 seconds.
4 The receiver push buttons operate the same in the CD
Changer mode as in the CD mode. The CD Changer
also includes the following functions:
CD Changer:
Press the CD Changer button
to play the CDs that have been loaded into the
changer. Once in the CD Changer mode, press
this button to increment the disc.
Random Play:
Random Play allows all tracks on
all discs in the changer to be played in random
order. It operates the same as in the CD mode
with the 3/RDM button.
Repeat:
The repeat function may repeat the
current selection or repeat the entire disc.
Pressing the 2/RPT button once repeats the
current track and the display shows the “RPT” and
CD Changer icons. Pressing the RPT button a
second time will repeat the current disc. In this
case the “RPT” icon will illuminate and the CD
Changer icon will flash. A third press of the RPT
button disables the Repeat function.
DSCN (Disc Scan):
1/DSCN enabled while in the
CD Changer mode will cause the changer to play
the first 10 seconds of the first track of each disc
in the CD Changer in consecutive order starting
from the current disc. The display will show the
“DISCSCAN” and this disc number.
To Next Page
Loading...
Need help?
General
