5S
e
r
v
i
c
e
This subscreen shows the service items with
“time remaining” value at once. Press the
SELECT button to adjust interval or to check
detail information.
-E
n
g
i
n
e
o
i
l
/
f
i
l
t
e
r
I
n
t
e
r
v
a
l
This shows the value of engine oil/filter interval
with the unit of hours. According to engine oil/
filter type, operator can adjust engine oil/filter
interval. The setting range is 50 ~ 500 hours.
T
i
m
e
r
e
m
a
i
n
i
n
g
This shows the value of remained time for next
engine oil/filter service.
When the "Time remaining" reaches at 40 h,
20 h and 0 h, check screen with "Time
remaining" and "Interval" will pop up on I-ECU.
Service the maintenance items which should
be serviced in that interval. For the service
interval and maintenance items, see page
225
.
R
e
s
e
t
t
i
m
e
r
e
m
a
i
n
i
n
g
?
After servicing the maintenance items, the
time can be reset. Pressing SELECT button
results in a "Yes/No" question on the screen.
Press ESC button for "No " or SELECT button
for "Yes". When the time is reset, the next
service interval and "Time remaining" will be
displayed.
If operator does not replace the engine oil/filter
and reset this value it turns to zero to negative.
Service
Fuel filter/Water sep 450h
Hydraulic oil filter 1900h
Hydraulic oil 2000h
Reset time remaining?
No : Yes :
ESC
Service
Time remaining : 450h
SELECT SELECT
V1091443
SELECT
Service
Time remaining : 255h
Service
Service
ESC ESC
ESC
Engine oil/filter 450h
Engine oil/filter
Interval :
500h
Engine oil/filter Engine oil/filter
Interval : 500h
450h
Engine oil/filter
475h
F
C
Hydraulics
Electrical system
Vehicle information
Service
Setup
Engine
V1091442
Service
Engine oil/filter 450h
SELECT
ESC
Fuel filter/Water sep 450h
Hydraulic oil filter 1900h
Hy
dr
aul
ic
o
il
2000h
V1091572
Check
Engine oil filter
450/500
3
8
I
n
s
t
r
u
m
e
n
t
p
a
n
e
l
s
D
i
s
p
l
a
y
u
n
i
t