MDU(Machine Display Unit)
This animation is to show you how to operate display unit.
Push the arrow button step by step.
If the key is ON position, all lamps are ON for one second and then engine speed and work-mode are
displayed. By pushing arrow button, display contents are changed from engine speed to battery voltage,
hammer operating hour, key number, pump flow rate and error code.
When pump flow rate is selected, if you push the arrow button for 5 second, the unit of flow will be
changed between lpm and gpm.
When error code is selected, active error codes are displayed consecutively.
If pump flow rate (option) is changed, set value is displayed on main display window for 10 seconds.
Picture text:
To Next Page
Loading...
