Need help?Do you have a question about the Volvo ECR 58 and is the answer not in the manual?
General| Brand | Volvo |
|---|---|
| Model | ECR 58 |
| Category | Construction Equipment |
| Language | English |
Lists components of the ICS control system.
Explains LED indications for Power, CAN-bus, and Internal Error.
Details on Cab Control Unit (CCU) and Rototilt Control Unit (TCU).
Function of the display and the quick coupler locking switch.
Regulates oil flow for extra equipment, Rototilt control, and extra hydraulics.
Describes joystick controls and programmed handle functions.
Details on joystick functions for Option 1 and Option 2.
How to activate the ICS system and operate Rototilt functions.
Adjusting the speed of all functions via the display.
Using pulsating function and non-variable hydraulic flow.
Procedure for detaching tools and checking quick coupler locks.
Display indications for coupler status (open/closed).
Procedure for attaching tools and inspecting the locking function.
Operation of quick couplers with SecureLock and QuickChange™ features.
Steps for safely detaching Rototilt and using the safety plug.
How to operate extra hydraulics and switch back to Rototilt control.
Using non-variable hydraulic flow and on/off control functions.
Overview of the ICS display, menus, and keys for configuration.
Adjusting operator profiles and saving settings.
Adjusting general and function-specific speed settings.
Explains handle functions, roller/switch configuration.
Warnings related to swapped tilt/rotation roller positions.
Viewing angle information and activating the pulse function.
Saving and recalling specific rotor and tilt positions.
How to activate/deactivate the hydraulic thumb, preventing simultaneous use.
Using automatic grade control and shake function frequency.
Setting pressurising time and calibrating angle display.
Viewing system info, serial numbers, software versions.
Activating and operating the double feeder mode.
System reminders for service intervals (8, 40, 160, 500 hours).
Adjusting the brightness of the display screen.
Overview of active alarms, troubleshooting menu structure.
Checking input signals from rollers/switches and output currents.
Troubleshooting quick coupler locking, sensors, and machine coupler errors.
Specific troubleshooting for QuickChange™ sensor faults and operation.
Diagrams of valve blocks for swivel and tilt, and remaining connections.
Wiring diagrams for Rototilt harnesses (R2-R8) and oilquick.
Wiring diagrams for R2 and R3-R8 harnesses connecting to the TCU.
Wiring details for electric swivel units and sensors.
Machine wiring for ICS, CCU units, and Rototilt connections.
Wiring diagrams specific to the ICS Direct system.
Wiring for boom harness, ICS/RAC, and machine coupler options.
Lists system and application errors with causes and remedies.
Further details on application errors, their causes, and solutions.
To Next Page
