Do you have a question about the Volvo ECR 88 D and is the answer not in the manual?
Brand | Volvo |
---|---|
Model | ECR 88 D |
Category | Construction Equipment |
Language | English |
Describes the main components of the ICS control system, including harness, display, handles, and valve blocks.
Details the function and signals of the Cab Control Unit (CCU).
Regulates oil flow for Rototilt functions when the 8-pole connector is attached.
Explains parallel use of tilt, rotation, grapple, and extra functions with machine pedals.
Steps to detach the tool safely by positioning it horizontally on firm ground.
Describes coupler operation using the display and quick coupler locking function switch.
Steps for attaching the tool, aligning, pivoting, and confirming lock engagement.
Tests to ensure secure attachment, including pushing and operating the bucket.
Operation and warnings for the SecureLock quick coupler.
Operation and sensor monitoring for the QuickChange quick coupler.
How to switch between Rototilt operation and extra hydraulics mode.
Explains display layout, menus, keys, and navigation.
How ICS prevents simultaneous use of tiltrotator and hydraulic thumb.
How to activate AGC via handle button when RPS is installed.
How to activate and control the double feeder mode.
How alarms are shown on display and where to find detailed information.
Navigating current, historical alarms, and alarm log.
Input/output signals for the quick coupler lock circuit.
Sensor indications and wedge location for the coupler.
Reasons for sensor faults and their acknowledgement.
Operational issues and CAN bus errors in QuickChange systems.
Wiring for CCU units A (Gray), B (Black), and C (Green).
Overall wiring diagram for the ICS Direct system, including steering and activate signals.
Lists system errors (100-121) and their possible causes and remedial actions.
Lists initial application errors (1-9) and their possible causes and remedies.
Continues listing application errors (10-31) and their possible causes and remedies.