Volvo i-shift transmission User Manual

Volvo I-Shift Transmission 11
Engine Brake Performance Mode
When the Volvo engine brake is active and transmission is shifting gears, there
will be a momentary interruption of the braking torque. This may result in a
temporary increase of vehicle speed. The operator will experience the same
momentary loss of engine braking as is experienced when downshifting a
conventional manual transmission.
Volvo’s enhanced engine brake (I-VEB) is standard with I-Shift transmissions.
The current brake position is displayed in the status bar in the DID. The
switch on the end of the 6-position engine brake control sets and changes the
set speed for the engine brake.
Brake Control Positions
When cruise control is set, move the engine brake control to the A position
and set the brake cruise speed with the set switch to maintain the set speed.
The transmission interacts with the engine brake to provide optimum
performance.
usa22983Final.fm Page 11 Tuesday, March 6, 2007 8:21 AM

Volvo i-shift transmission Specifications

General

Brand	Volvo
Model	i-shift transmission
Category	Automobile Parts
Language	English