Volvo STD 420-0003 User Manual

Standard STD 420-0003
Volvo Group
Version
1
Page
11
6.2.4.3 Calculating the fogging value G
To calculate G in mg, the value of G
j
is calculated for each glass plate by using:
G
j
= G
1
– G
0
where
G
j
is fogging mass of condensation on each piece of aluminium foil
G
1
is the mass of the aluminium foil after the test, in mg
G
0
is the mass of the aluminium foil before the test, in mg
The fogging value G is the mean value of G
j
. G is reported with an accuracy of 0,01 mg.
7 Report
The report shall contain:
- Reference to this standard
- Reference to mehod used (method F evaluation of fogging using a glossmeter or method G gravimetrical
method, evaluation of fogging using a balance)
- Identification of test pieces
- Date of production
- Type of test pieces
- Thickness of the test pieces
- Date of test
- Person responsible for testing
- Any deviations from standard
- Results: mean value and individual values
- Number of test pieces tested
- Any particular observations.
8 Temperature options
The temperature shall be stated in the documentation referring to this standard.

Volvo STD 420-0003 Specifications

General

Brand	Volvo
Model	STD 420-0003
Category	Automobile
Language	English