72
Interior
Seating position
The driver and passenger seats can be
adjusted to the optimum sitting and driving
positions.
1. Forwards/backwards, lift the handle to
set the correct distance to the steering
wheels and pedals. Check that the seat
has locked into position after adjusting.
2. Raise/lower the front edge of the seat
cushion, pump up or down (option)
3. Raise/lower the seat, pump up or down
(option)
4. Change the lumbar support, turn the
knob
Front seats
5. Change the angle of the backrest, turn
the knob
6. Control panel for power seats.
Position controls (2) and (3) are not fitted to
all seat models.
WARNING!
• Adjust the driver's seat position before
driving, never while driving.
• Check that the seat is locked in
position.
Position controls (2) and (3) are not fitted to
all seat models
Lowering the front seat backrest
(option)
The passenger seat backrest can be folded
forwards to make room for long loads.
1. Move the seat as far back as possible.
2. Set the backrest to 90°, the upright
position.
3. Lift the catches on the rear of the
backrest whilst folding it forwards.
To Next Page
