79
Interior
Folding the backrest
1. Pull the straps to fold the seat cushions
forwards.
2. Pull the latches up and forward to
detach the backrest. A red mark on the
latches indicates that the backrest is not
in the locked position
3. Fold the backrest halfway forward and
remove the outer head restraints. The
head restraint in the centre seat must be
pressed down fully or removed
4. Place the head restraints in the plastic
sleeves on the bottom of the folded seat
cushions.
NOTE! The red indicator must not be visible
when the backrest is folded back into the
upright position. The backrest is not secure if
still visible.
WARNING!
Do not forget to remove the seat belt
from the hooks again when backrest has
been folded up.
To Next Page
