05 Locks and alarm
Battery in remote control key
05
133
Low battery in remote control key
When the battery runs down and full function-
ality cannot be guaranteed, the information
symbol
and display show KEY BATTERY
LOW VOLTAGE
or REMOTE BATTERY
LOW VOLTAGE
.
Changing the remote control key
battery
G019406
If the locks repeatedly fail to respond to signals
from the remote control key at a normal dis-
tance, the battery should be replaced
(type CR 2450, 3 V).
1. Place the remote control key with the key-
pad downward and prize up the cover
using a small screwdriver.
2. Remove the cover.
3.
Carefully examine how the battery's (+) and
(–) sides are fitted (there is a diagram under
the cover).
4. Prize out and change the battery. Avoid
touching the battery and its terminals with
your fingers.
5. Refit the cover and press it in.
> Dispose of the old battery in an environ-
mentally-responsible manner.
To Next Page
Loading...
Need help?
General
