pg. 90 Emergency towing
Emergency towing
The towing eyelet is located in the tool kit, under the floor of the cargo area, with the spare tire. This
eyelet must be screwed into the positions provided on the right sides of either the front or rear bumper
(see illustration). To attach the towing eyelet:
● Use a coin to pry open the lower edge of the cover (A).
● Screw the towing eyelet in place, first by hand and then using the tire iron (B) until it is securely in
place.
After the car has been towed, the eyelet should be removed and returned to the tool kit. Press the cover
back into position.
To Next Page
Loading...
