Fitting the towball
1. Remove the guard plug.
6. Check that the indicator window shows
green.
4. Insert the towball section until your hear
a click.
5. Turn the key anticlockwise to the locked
position. Remove the key from the lock.
3. Check that the indicator window (3)
shows red. If the window does not show
red, press in (1) and turn the locking wheel
anticlockwise (2) until you hear a click.
2. Ensure that the mechanism is in
the unlocked position by turning the key
clockwise.
To Next Page
Loading...
Need help?
General
