EasyManua.ls Logo

Volvo XC40 Twin Engine - Interior Overview and Features; Driver Interface Controls; Driving Systems; Interior Features & Safety

Volvo XC40 Twin Engine
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OVERVIEW, INTERIOR
Centre display is used to control many of the car's main func-
tions, e.g. media, navigation*, climate control, driver support
systems and in-car apps.
The driver display shows information on the drive, e.g. speed,
engine speed, navigation* and active driver support. It is possi-
ble to choose what is to be shown in the driver display via the
app menu, which you open using the right-hand keypad on the
steering wheel. Settings can also be made via
Settings My
Car
Displays in the centre display's top view.
Start button is used to start the car. To access the displays
without starting the engine, depress the start button and
release. Hold the brake pedal depressed and press the button
to start the car. Switch off the car by pressing the start button.
Drive modes* are set using the DRIVE MODE button. Press
the button to choose between Hybrid, Pure, Power/Polestar
Engineered
* and Individual in the centre display. Tap on the
desired drive mode directly on the screen or press the button
again to move the cursor to the desired drive mode. With
Individual you can adapt a driving mode according to your pre-
ferred driving characteristics. The individual driving mode is
activated in Settings My Car Individual Drive Mode in
the centre display's top view.
Parking brake is activated when you pull the control
upwards, at which point a symbol in the driver display illumi-
nates. Release it manually by pressing down on the control and
the brake pedal at the same time. Using automatic braking
when stationary (
), the brake pedal can be released while
maintaining braking effect when the car has stopped, e.g. at
traffic lights. Remember that both Automatic braking when sta-
tionary and Automatic application of the parking brake must be
deactivated for an automatic car wash. Deactivate automatic
parking brake application in the centre display's top view under
Settings My Car Parking Brake and Suspension.
Wireless phone charger* can be used if the phone supports
wireless charging. Remove any objects from the rubber panel
under the centre display and position the phone in the centre.
When the phone is being charged, is shown at the top of
the centre display. If the phone is positioned incorrectly, or if
objects prevent charging, a message is shown in the centre dis-
play.
The hook in the glovebox can be used e.g. to support a bag
left on the floor. Open the glovebox, fold out the hook, close the
glovebox and hang the bag's handle on the hook.
Switch for passenger airbag* is located on the end face of the
instrument panel on the passenger side and can be accessed
when the door is open. Pull the switch out and turn to ONOFF
in order to activate/deactivate the airbag function.
01

Related product manuals