Vonets VAP11G-300 Technical Training

10
Connectivity Settings and Downloading Postage:
Connectivity Setting.
1. Power ON PostBase meter and wait until Home screen is displayed.
2. Select Menu, press scroll button twice and select Manage Connection.
3. The PostBase meter will display its current connection settings.
4. Select , this will allow you to change your current settings.
5. Select Ethernet, then press .
6. Select DHCP = Enabled, then press .
7. Select Proxy = Disabled, then press .
8. Verify settings are correct, then press . The PostBase meter will
attempt to establish a connection.

Vonets VAP11G-300 Specifications

General

Wi-Fi Standard	802.11b/g/n
Frequency	2.4GHz
Max Data Rate	300Mbps
Weight	30g
Storage Temperature	-20°C to 70°C
Antenna	Built-in
Operating Mode	AP, Repeater
Ethernet Port	10/100Mbps
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Port	RJ45