Vonets VAP11G-300 User Manual

VONETS
1
VONETS Series Product Manual
Declaration
Copyright © 2016 Shenzhen HouTian Network Communication Technology Co.Ltd
All rights reserved, with retained ownership
Without Shenzhen HouTian Network Communication Technology Co.Ltd written authorization, any
company or personal can’t copy, writer or translation part or all contents. Can’t do commodity
distribution for any commercial or profitable purposes by any ways(electricity, mechanical,
photoprint, record or other methods).
VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology
Co.Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong
to the individual owners. The product specifications and information technology mentioned in this
manual are just for reference, if any updates, without other notice. Except for special agreements,
this manual is just for user guidance, any statements, information and so on in this manual can’t
constitute the warranty of any forms.
Form 1
Class A: Professional WiFi Repeater + bridge Series Product
Model
Power Supply
Parameters
Point to point
Transmission
distance
Transmission
Rate（Mbps）
Frequency
VAP11G-300
DC5V-15V/500mA
80m--100m
300
2.4G
VAP11N-300
DC5V-15V/500mA
50m--80m
300
2.4G
MINI300
DC5V/500mA
50m--80m
300
2.4G
VRP300
AC110V-240V
50m--80m
300
2.4G
VRP300 PLUS
AC110V-240V
50m--80m
300
2.4G
VRP5G (Dual Band)
AC110V-240V
50m--80m
300+450
2.4G/5G
VAP11G-500 (High
power)
DC5.5V--15V/2A
300m--500m
300
2.4G
VAP11G-1000(High
power)
DC5.5V--15V/2A
800m-1000m
300
2.4G
VAP11G-2000(High
power)
DC5.5V--15V/3A
1500m--2000m
300
2.4G
Class B: WiFi Router + Repeater + Bridge Series Product
VAR11N-300
DC5V/500mA
50m--80m
300
2.4G

Vonets VAP11G-300 Specifications

General

Wi-Fi Standard	802.11b/g/n
Frequency	2.4GHz
Max Data Rate	300Mbps
Weight	30g
Storage Temperature	-20°C to 70°C
Antenna	Built-in
Operating Mode	AP, Repeater
Ethernet Port	10/100Mbps
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Port	RJ45

Summary

VONETS Product Application Overview

WiFi Repeater and Bridge Functionality

Explains the primary use of Class A products for signal transfer and regional coverage.

Router Mode Functionality

Explains the use of Class B & C products as WiFi routers connecting to the internet.

Class A Product Setup Guide

Device Connection Methods

Details two methods for connecting Class A devices via Ethernet cable or WiFi.

Power On and Web Interface Access

Instructions for powering on the device and logging into the web configuration interface.

WiFi Hotspot Configuration

Steps for setting up the source WiFi hotspot password and extended SSID.

Transmit Power Settings

Explains how to configure transmit power for different Class A models.

Class B & C Product Setup Guide

Device Connection Methods

Details two methods for connecting Class B/C devices via Ethernet cable or WiFi.

Internet and WiFi Settings Configuration

Covers setting up internet connection parameters (DHCP/PPPOE) and WiFi security.

WAN/LAN Function Interchange

Describes how to switch between WAN and LAN functions for specific models.

Indicator Light Status

Class A 2.4G Product Indicators

Explains the meaning of indicator lights for Class A 2.4G repeater/bridge products.

Class A Dual Band Product Indicators

Explains the meaning of indicator lights for Class A dual-band repeater products.

General Operation and Common Faults

Factory Reset Procedure

Step-by-step guide on how to reset the device to factory default parameters.

Firmware Upgrade Information

Information on product firmware upgrade support and where to find related documents.

WiFi Hotspot Connection Issues

Troubleshoots issues where the device hotspot is found but cannot connect.

Internet Connectivity Troubleshooting

Troubleshoots problems where the device is connected but has no internet access.

Web Interface Login Problems

Explains common reasons and solutions for failing to log into the device's web interface.