Vonets VAP11G-300 Technical Training

5
Now click reboot. A “please wait” icon will show
up on your screen.
The Please wait screen will keep spinning and will
not refresh if the password for the wireless network
is correct. This is due to the wireless router issuing
a new IP address for the Vonets. If the page does
refresh, the password entered is not correct.
Confirm that your password is correct and try
again. If you are still not able to connect please
contact your local network administrator.

Vonets VAP11G-300 Specifications

General

Wi-Fi Standard	802.11b/g/n
Frequency	2.4GHz
Max Data Rate	300Mbps
Weight	30g
Storage Temperature	-20°C to 70°C
Antenna	Built-in
Operating Mode	AP, Repeater
Ethernet Port	10/100Mbps
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Port	RJ45