Vonets VAP11G-300 Technical Training

7
To reset the device to connect to a different network,
press and hold the small black button next to the
cable on the device for 30 seconds. (As Seen Below)
The device will reset and allow you to start the
setup process again.

Vonets VAP11G-300 Specifications

General

Wi-Fi Standard	802.11b/g/n
Frequency	2.4GHz
Max Data Rate	300Mbps
Weight	30g
Storage Temperature	-20°C to 70°C
Antenna	Built-in
Operating Mode	AP, Repeater
Ethernet Port	10/100Mbps
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Port	RJ45