BEFORE FIRST USE
Before using this appliance for the first time, please ensure you complete the following
steps:
• Remove all packaging and labels.
• Inspect the product for any damage and check
that all parts are included.
WARNING! Do not use the Ultra Blender if any
parts are missing or damaged.
• Before initial use, wash all removable
components using warm soapy water and dry
thoroughly.
• Wash the BLENDING JARS and BLADE UNIT
with warm water and mild detergent. Dry
thoroughly before assembly.
CAUTION: Take extra care when washing
the BLADE UNIT as the BLENDING BLADES
attached are very sharp.
NOTE: The BLENDING BLADES are non-
detachable from the BLADE UNIT.
• Wipe down the MAIN UNIT using a clean damp
cloth.
WARNING! Do not immerse the MAIN UNIT,
cord or plug in water or any other liquid.
ASSEMBLY
4
• Position the MOTOR UNIT on a stable, level,
heat-resistant work surface. Firmly push down so
the suction feet stick to the surface.
• Add your chosen ingredients to the preferred
BLENDING JAR. (See the ‘Recipes’ page for
ideas).
CAUTION: Do not exceed maximum capacity
marker.
CAUTION: Do not add any hot liquids to the
BLENDING JARS.
CAUTION: If you are choosing to blend ice with
your ingredients, we highly recommend adding
a small amount of liquid to the BLENDING
JAR to prevent any possible damage to the
BLENDING BLADES. Do not pack with large ice
cubes.
IMPORTANT: Add enough ice to ensure the
BLENDING BLADES are covered.
NOTE: We recommend adding a small amount
of liquid to any of the ingredients you are using
to help the blending function.
• With the ingredients added, screw the BLADE
UNIT onto the open end of the BLENDING JAR
and ensure it is securely attached.
I
N
G
R
E
D
I
E
N
T
S
L
I
Q
U
I
D
I
C
E
To Next Page
Loading...
