VooPoo DRAG 2 - Advanced Mode Operations and Customization

B. FIT Mode:
a). Boot default , Press
“+” or “-” button to
select the three options .
C. TC Mode:
a). Support SS, Ni, Ti, NC, TC, 5 kinds of
heating wire, factory default SS, Ni, Ti,
Connect computer APP to open NC, TC；
b). Temperature control adjustable range ：
200-600℉ / 100-315℃
- When the temperature setting is at 100℃,
keep pressing “-”, it will turn to be 600℉;
- When the temperature setting is at 200℉,
keep pressing “-”, it will turn to be 315°C.
c). To adjust wattage while in TC Mode, press
fire button 4 times rapidly to activate wattage
adjustment. You will see the “W” wattage icon
flashing. The wattage can be adjusted from
5W to 80W.
d). Press “+” and “-”Simultaneously，Enter
function menu ：
TC Mode Custom Mode
Coil Cooling Value Coil Coefficien