G. Function Menu:
Press up and down buttons simultaneously for
1.5 seconds, enter the function menu Interface.
Press up button or down button simultaneously
to choose the function. Press the fire button to
make confirmation and go to next step. You can
make the adjustment according to pressing up or
down button simultaneously. When you finished
the adjustment, press fire button 1.5 seconds,
the device will return to working interface.
a. The Selection under Power Mode Interface:
Normal Mode Custom Mode
Power
Mode to Voltage Mode
SN
Checking
Software version
options)
Series No.
(Total 5
b. The Selection of temperature control mode
Interface:
Normal , Voltage Mode to Wattage Mode
Series No Checking
Software version
c.The Selection of temperature control mode Interface:
Normal Custom Mode , Adjusting
' AdjUSting Wire CoefficientCooling Value
Series Number Checking
Software
(Totally six functions)
version
To Next Page
Loading...
