Figure 4-5. Apply Configuration Changes Here
9. With this you have just finished creating a SIP extension that will be used by the
Voptech VI2006 to register with the Elastix Server. Repeat Steps 5 through 8 to
similarly create another extension (different values on Step 6) to be used by the IP
(SIP) Phone to register as well (extension 302 in this example). Once finished you
will see something similar to Figure 4-6
Figure 4-6. Voptech and IP Phone extensions successfully created
10. To register the Voptech Phone, you will need to enter the information from the
extension created on the Elastix Server into the Voptech Phone by logging into the
Voptech VI2006 WebUI.
To register the Voptech Phone we have two methods: Manual Configuration and
AutoProvisioning using Elastix’s Endpoint Configurator (This phone supports this
feature in Elastix 2.4 or higher).
To Next Page
Loading...