VORAGO BTE-400 - Page 13

Synchronization
How to connect with a Bluetooth device
Underpowero ffstatus,longpressMFBabout3seconds,the
redan dblueindic atorsblinkatthesametimeforthreetimes,
the nautoenterin toaparingmodewithred&bluelightflash
alternately.
Open the Bluetooth software of your pho ne, search the
headsetandfindtheBluetooth headset,pairitto finishthe
connection.
Ifyouwant toconect the device toa new smartphone, you
needtoturnofftheconectionofthea lreadypairedandrepet
theprocees.
• Re-Connecting: When powered on, the headset is
automatically connected with the smartphoebe that the
headsethaspreviouslypairedwith.
• Answer / call:When a callis incoming, youwill hear the
voiceof“IncomingCall”,andthenitwillautoreadincoming
phonenumber.ClickMFBbuttononcetoanswerthecall.
• Reject incoming calls:When a call is coming,long press
MFBbuttonfor1secondwithavoiceof“CallRejected”.
• Hang up calls: Pulsa la tecla Multifunción (5) durante la
llamadaparadesconectar.
• Voice control:Atstandbystatus doubleclickMFBbutton,
youwillhearasoundof“VoiceDial”.DoubleclickMFBbutton
againtocancelthevoicecontrol(Makesureyoursmartphone
supportvoicecontrol).
• Power o:LongpressMFBabout3seconds,thered
and blue indicators blink at the same time for three
times.