Vornado 633 - User Manual

Other manuals for Vornado 633

Instructions14 pages

Questions and Answers

J
jwalkerAug 13, 2025
What to do if my Vornado 633 Fan doesn't power on?
- P
  Patricia WilliamsAug 13, 2025
  If your Vornado Fan won't turn on, here are a few things to check: First, make sure the power cord is properly plugged into an electrical outlet. Next, ensure that a fan speed setting is selected. If it still doesn't work, the unit may be damaged or need repair, so unplug it and contact Consumer Service for assistance. Also, the outlet could be worn or damaged; try a different outlet or contact a qualified electrician.
C
Christina WrightAug 17, 2025
What to do if my Vornado 633 Fan won't turn on?
- J
  Jennifer GonzalesAug 17, 2025
  If your Vornado Fan isn't powering on, first, ensure the power cord is securely plugged into an electrical outlet. Also, make sure that a fan speed setting is selected. If it still doesn't work, try a different outlet or contact a qualified electrician. If the issue persists, cease usage, unplug the unit, and contact Consumer Service for assistance.
M
Marissa BarnesAug 21, 2025
What to do if my Vornado 633 doesn't turn on?
- J
  Janice HoltAug 21, 2025
  If your Vornado Fan fails to power on, make sure the power cord is properly plugged into an electrical outlet. Ensure that a fan speed setting is selected. Try plugging the fan into another outlet, or contact a qualified electrician to check the outlet. If the unit is still not working, cease usage, unplug it, and contact Consumer Service for assistance.
M
Matthew CameronAug 25, 2025
What to do if the GFCI trips when using Vornado 633?
- D
  David HowardAug 25, 2025
  If the GFCI trips when you're using your Vornado Fan, especially when changing speeds, try plugging the fan into an outlet that isn't connected to a GFCI device. It's also possible that the GFCI outlet is weak or defective, so you may need to contact a qualified electrician to check it.
M
Maria EatonAug 28, 2025
How to increase airflow in my Vornado Fan?
- D
  Dawn ArnoldAug 29, 2025
  If the airflow from your Vornado Fan is weak or slow, try these steps: * Adjust the fan to a higher speed setting. * Check for and remove any obstructions blocking the airflow. * Adjust the direction of airflow towards yourself.
A
Anthony RogersSep 1, 2025
What to do if my Vornado 633 airflow is weak?
- C
  Christopher McdanielSep 1, 2025
  If the airflow from your Vornado Fan seems weak, first, ensure the fan is set to a higher speed setting. Also, check for any obstructions blocking the airflow and remove them. Finally, adjust the direction of the airflow towards yourself.
M
Molly Jackson MDSep 5, 2025
Why is the airflow weak on my Vornado Fan?
- R
  rwallsSep 5, 2025
  If your Vornado Fan's airflow feels weak or slow, first, try adjusting it to a higher speed setting. Also, make sure nothing is blocking the airflow. You might also want to adjust the direction of the airflow towards you.
S
Stephanie ByrdSep 9, 2025
Why does my Vornado 633 trip the GFCI outlet?
- J
  janicejohnsonSep 9, 2025
  Under certain conditions, a GFCI (Ground Fault Circuit Interrupter) outlet may trip when changing speeds on your Vornado Fan. To resolve this, try using an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet, in that case, contact a qualified electrician to check the GFCI outlet.