Vornado 630 User Manual (English)

Questions and Answers:

C
cartersarahAug 14, 2025
What to do if my Vornado Fan doesn't power on?
- D
  David HernandezAug 14, 2025
  If your Vornado Fan won't turn on, here are a few things to check: First, make sure the power cord is properly plugged into an electrical outlet. Next, ensure that a fan speed setting is selected. If it still doesn't work, the unit may be damaged or need repair, so unplug it and contact Consumer Service for assistance. Also, the outlet could be worn or damaged; try a different outlet or contact a qualified electrician.
R
Robin CooperAug 18, 2025
What to do if my Vornado 630 Fan won't turn on?
- D
  daviesbrettAug 18, 2025
  If your Vornado Fan isn't powering on, first, ensure the power cord is securely plugged into an electrical outlet. Also, make sure that a fan speed setting is selected. If it still doesn't work, try a different outlet or contact a qualified electrician. If the issue persists, cease usage, unplug the unit, and contact Consumer Service for assistance.
N
Nicolas PattersonAug 21, 2025
What to do if my Vornado 630 doesn't turn on?
- J
  Jennifer AguilarAug 21, 2025
  If your Vornado Fan fails to power on, make sure the power cord is properly plugged into an electrical outlet. Ensure that a fan speed setting is selected. Try plugging the fan into another outlet, or contact a qualified electrician to check the outlet. If the unit is still not working, cease usage, unplug it, and contact Consumer Service for assistance.
P
Phillip Fleming PhDAug 25, 2025
Why is my Vornado Fan remote not working?
- T
  tyler94Aug 26, 2025
  If your Vornado Fan remote control isn't working, the battery may not be installed. Refer to CONTROLS - Remote Control Battery on page 9 for instructions. If the battery is dead, replace it with a new 3 volt CR2032 battery; refer to CONTROLS - Remote Control Battery on page 9 for instructions. Also, the remote requires a direct line-of-sight path to the unit's receiver lens (located above the Vornado logo).
T
traceyclementsAug 28, 2025
What to do if the GFCI trips when using Vornado Fan?
- M
  Mr. Steven GrantAug 28, 2025
  If the GFCI trips when you're using your Vornado Fan, especially when changing speeds, try plugging the fan into an outlet that isn't connected to a GFCI device. It's also possible that the GFCI outlet is weak or defective, so you may need to contact a qualified electrician to check it.
K
Katherine JensenAug 31, 2025
How to increase airflow in my Vornado 630 Fan?
- A
  Andrew SalinasAug 31, 2025
  If the airflow from your Vornado Fan is weak or slow, try these steps: * Adjust the fan to a higher speed setting. * Check for and remove any obstructions blocking the airflow. * Adjust the direction of airflow towards yourself.
T
Travis ReynoldsSep 3, 2025
What to do if my Vornado 630 Fan airflow is weak?
- T
  torresnicholasSep 3, 2025
  If the airflow from your Vornado Fan seems weak, first, ensure the fan is set to a higher speed setting. Also, check for any obstructions blocking the airflow and remove them. Finally, adjust the direction of the airflow towards yourself.
S
Stephanie HudsonSep 6, 2025
Why is the airflow weak on my Vornado 630?
- C
  christopher28Sep 7, 2025
  If your Vornado Fan's airflow feels weak or slow, first, try adjusting it to a higher speed setting. Also, make sure nothing is blocking the airflow. You might also want to adjust the direction of the airflow towards you.
J
Jean WagnerSep 10, 2025
Why does my Vornado 630 Fan trip the GFCI outlet?
- A
  Alisha TrujilloSep 10, 2025
  Under certain conditions, a GFCI (Ground Fault Circuit Interrupter) outlet may trip when changing speeds on your Vornado Fan. To resolve this, try using an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet, in that case, contact a qualified electrician to check the GFCI outlet.

Vornado 630 Specifications

General

Type	-
Airflow	1091 m³/h
Placement	Floor
Noise level	64 dB
Fan diameter	240 mm
Product color	Black
Fan speed (max)	1600 RPM
Housing material	Polystyrene (PS)
Number of speeds	3
AC input voltage	230 V
Power source type	AC
AC input frequency	50 Hz
Power consumption (typical)	60 W
Package depth	310 mm
Package width	230 mm
Package height	355 mm
Package weight	3100 g
Master (outer) case width	633 mm
Master (outer) case height	373 mm
Master (outer) case length	473 mm
Quantity per master (outer) case	4 pc(s)