What to do if my Vornado Heater fails to power on?
If your Vornado Heater doesn't power on, it might be due to a tripped circuit breaker or blown fuse. Try resetting the circuit breaker or replacing the fuse. Also, the Automatic Safety Shut-Off may have been initiated if the unit overheated; see RESETTING YOUR VORNADO HEATER. If neither of these solutions work, stop using the heater, unplug it, and contact Consumer Service for help.
Why is my Vornado Heater not producing enough heat?
If your Vornado Heater isn't producing enough heat, ensure it is set to High Heat and the thermostat is at the highest temperature setting. Also, close all doors and windows to keep heat in. Allow the unit time to fully circulate the heat throughout the room, as it may take several minutes.
What to do if my Vornado Heater powers on but there is no heat?
If your Vornado Heater turns on but doesn't produce heat, power it off and unplug it. Check the black disk on the bottom of the unit and push it in 4-5 times to ensure it's not stuck. Place the unit on a flat surface, make sure the power cord isn't underneath it, then plug it back in, power it on, and turn it to the highest heat setting.
General| Voltage | 120V |
|---|---|
| Control Type | Manual |
| Safety Features | Tip-over protection, Overheat protection |
| Thermostat | Adjustable |
| Color | Black |
| Type | Whole Room Heater |
| Heat Settings | 2 (Low/High) |
| Power Consumption | 750W, 1500W |
Basic precautions to reduce risks of fire, electric shock, and injury.
Rules on circuit use, cords, and prohibited applications.
Explanation of Vornado's unique heat circulation technology for uniform heating.
Details on power, heat settings, and thermostat controls.
Step-by-step guide for initial setup, placement, and basic operation.
Procedure to reset the safety shut-off system after overheating.
Details on built-in safety mechanisms like auto shut-off and tip-over protection.
Guidance on cleaning, storage, and solutions for common operational issues.
Recommendations for efficient heater operation and usage.
Details on warranty terms, exclusions, and obtaining service.
To Next Page
