Do you have a question about the Vornado OSCTH1 and is the answer not in the manual?
To reduce risk of fire, electrical shock, and injury, follow specific installation guidelines.
Use heater as directed, avoid touching hot surfaces, and unplug when not in use.
Clean regularly, do not open housing. Service by authorized center only.
The exterior remains safe to touch, even on high heat settings.
Shuts off power if airflow is blocked to prevent overheating.
Designed to resist curious fingers for added safety.
Cuts power if the heater tips over; requires manual restart.
Includes Power ON/OFF button and a red LED indicator light.
Features Oscillation, Thermostat adjustment (-/+), and Mode selection.
Allows setting automatic shut-off time in one-hour intervals.
Shows settings and dims after inactivity, displaying room temperature.
Position heater, plug in, and use power button to turn on and select mode/temperature.
Set automatic shut-off up to 12 hours; cancel by setting to 0 or holding timer icon.
Turn oscillation on/off for 80° range; continues even after set temp is reached.
Heater enters cool down mode after powering off, exhausting remaining heat.
Unplug heater, use vacuum brush attachment for dust on inlets and grill.
Wipe the entire heater exterior with a soft, dry cloth.
Periodically blow out heater with pressurized air for heat element and motor.
Clean before storage, unplug, bundle cord, cover or use original carton, store in cool, dry location.
Dispose of all packaging materials in an environmentally responsible manner.
Power off, unplug, remove obstructions, wait 5-10 min, plug in, and power on.
If heater repeatedly shuts off or won't reset, contact Vornado Consumer Services.
Check plug, circuit breaker, fuse, or if unit has overheated or tripped tip-over switch.
Ensure High Heat setting and thermostat are high, close doors/windows.
Check power button, unplug, ensure plunger isn't stuck, and set to highest heat.
Warrants product free from defects for five years; Vornado will repair or replace at no cost.
Call or email for RA form, provide model/serial numbers, ship product to specified address.
Warranty does not cover abuse, modification, or unauthorized repair; limits liability for damages.