6 English
designed to automatically shut off when overheating is detected.
See the “RESET HEATER” instructions in this guide to determine
how to check and reset the heater.
• If the heater and other electrical products suddenly stop working
at the same time, your home circuit breaker or fuse may have
tripped due to an overload of power. Consider only running your
heater on the “low” setting, only running one heater at once and
unplugging all other electrical products while running the heater,
and/or hiring an electrician to install an additional circuit to your
home’s electrical system.
SERVICING WARNING—To reduce risk of re, electrical shock
and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this manual.
Prior to cleaning, turn off the power on your product and unplug. Do
not use gasoline, thinners, solvents, ammonias or other chemicals
for cleaning. Refer to the CLEANING instructions provided.
- Do not open appliance housing while product is plugged in. To
avoid risk of shock, all service and/or repairs must be done by a
Vornado Authorized Service Center.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
