EasyManuals Logo

Vortex core User Manual

Vortex core
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background image
!
Key code Programming Instruction
The default layer (L0) can’t be programmed. Only layer 1(L1) ~ layer 3(L3) can be.
Step 1. Choose the layer (L1~L3) *
note
which you want to programmed.
Step 2. Press Fn + R_Ctrl to enter the programming mode (R_Spacebar LED steadily lit in
Blue color)
Step 3. Select a key you want to program (R_Spacebar LED flashing in Red Color)
Step 4. Key in the contents and then press Pn (R_Spacebar LED steadily lit in Blue color
again)
Step 5. Repeat step 2 ~ step 4 to program other keys.
Step 6. Press Fn + R_Ctrl to exit programming mode (Spacebar right LED off)
Note:
R_ctrl, M, < , > and L_ Shift keys are fixed can’t be programmed.
More:
!! Support Fn layer (e.g., Fn + A) to program.
!! Support time delay, press 15ms key (Fn + T) each time to delay 15ms, press 0.1s key
(Fn + G) each time to delay 0.1s, press 0.5s key (Fn + B) each time to delay 0.5s.
!! Consecutive delay will add up but will only be counted as 1 key stroke.
!! Every key can program up to 32 key strokes.
!! If there is no key pressed for 15 sec. in programming mode, it will back to normal mode.
Restore to factory default
1. Press and hold Fn + R, L_spacebar LED is flashing in white color for 5 seconds, then the
layer will restore to default.
2. Press and hold both Alt, L_spacebar LED is flashing in white color for 5 seconds it will
clean all layers’ key codes if you had programmed. (return to default layer.)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vortex core and is the answer not in the manual?

Vortex core Specifications

General IconGeneral
Layout40%
Switch TypeCherry MX
Key RolloverN-Key Rollover
Weight500g
Number of Keys47
Switch Mount TypePlate-mounted
Case MaterialAluminum
Keycap MaterialPBT
ConnectivityWired
BacklightNo
ProgrammabilityYes
Operating System CompatibilityWindows, macOS, Linux
ConnectionUSB

Related product manuals